|
|---|
Friday, July 30, 2010
blow gun Watch the video High force blow gun Coilhose Pneumatics 120 CFM
Posted by Kemplang at 5:53 PM
Its Extreme Ease Trigger™ is power-assisted and requires minimal force to actuate. This blow gun, with a 3/4 inch female inlet, is for use with tow-behind or large capacity compressors and conforms to OSHA standards. Made from durable materials: die cast aluminum, machined brass, aluminum and stainless steel. Coilhose recommends an inlet pressure of at least 90 PSI and a hose I.D. of at least 1/2 inch.
Available with 2 inch, 24 inch, or 48 inch extensions with standard safety nozzle tip to deliver a concentrated force to a small specific area – geared for, but not limited to outdoor use. Also available with a specially engineered multi-jet nozzle tip that utilizes the Coanda effect, generating a large amount of volume and thrust over a larger targeted area efficiently – geared for, but not limited to indoor use.
The standard safety extension model consumes 135 CFM at 100 PSI, while the multi-jet model has an air consumption rating of 120 CFM at 100 PSI.
Available with 2 inch, 24 inch, or 48 inch extensions with standard safety nozzle tip to deliver a concentrated force to a small specific area – geared for, but not limited to outdoor use. Also available with a specially engineered multi-jet nozzle tip that utilizes the Coanda effect, generating a large amount of volume and thrust over a larger targeted area efficiently – geared for, but not limited to indoor use.
The standard safety extension model consumes 135 CFM at 100 PSI, while the multi-jet model has an air consumption rating of 120 CFM at 100 PSI.
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment